VINYL TAPES:
PLYCOM® T-818 (G-Vinyl)
Designed specifically to meet the exacting requirements of the communications industry. T-818 is fully conformable at 0°F (-18°C) and pulls smoothly from roll at maximum splicing speeds without breaking, yet retains its strength and adhesion at elevated temperatures. Once wrapped T-818 stays down from -40°F to +176°F (-40°C to 80°C). MIL-I-24391C. "G" Vinyl Specification 8726.
Product specifications
PLYWRAP® 11 Vinyl Corrosion Protection Tape (E-Vinyl)
A strong physical barrier which is moisture-proof, inert and non-conducting. Used for protecting splice cases, load coil cases, conduit, and other areas. Provides atmospheric, galvanic, fungal, and bacterial protection. "E" vinyl Specification 8035.
Product specifications
RUBBER TAPES:
COHESIVE RUBBER TAPE (CR)
Consists of one soft, uncured layer bonded to a cured, abrasion-resistant layer. Unique separator allows controlled removal at the user's discretion. An air-tight, water-proof, gas-tight seal is formed when the uncured layer is bonded to itself. The industry standard for temporary splice coverings on communication and control cables. Maintains gas pressure in pressurized cable. Communications Industry Specification 7144.
Product specificationsDOUBLE RUBBER TAPE (DR)
Non-adhesive, self-bonding communications tape used for critical sealing and re-jacketing. One layer of uncured compound permanently fused to an abrasion-resistant layer of cured rubber. Easy-tear separator. Controlled unwind. Full or half-lapped, a strong bond develops between both plies to maintain gas pressure in pressurized cables. Communications Industry DR Specifications TL-192 and 6863.
Product specifications
150 ASTM RUBBER TAPE
A 30-mil (0,76 mm) self-amalgamating, low voltage rubber tape that can be used for insulating cable splices through 2kV, in conjunction with a jacketing tape. Compatible with low and high density polyethylene and polypropylene PIC cables plus all rubber and PVC cable elements. 150 ASTM conforms easily and self-amalgamates into a homogenous, void-free mass to provide an effective moisture seal. ASTM-D-4388, Communications Industry Specification 6746.
Product specificationsSPECIAL ITEMS:
100 ASTM Friction Tape
Made from first-quality sheeting impregnated with a special rubber compound. Superior strength, resistance to abrasion and excellent adhesion on smooth, rough or irregular surfaces. ASTM friction tape is an economical, general purpose tape used in a variety of applications such as cover tape over splicing and filler compounds, anchoring tape or splice overwrap, and more. Will not dry out or unravel. Communications Industry Specification 6747.
Product specifications
77 PLYGLAS® - Pressure Sensitive Glass Cloth Tape
A dense weave fiberglas fabric, impregnated and coated with a pressure sensitive thermosetting adhesive. Plyglas is heat and flame resistant, noncorrosive and will provide continuous 266°F (130°C) service. The high tensile strength of 77 Plyglas assures the user of long lasting, dependable, mechanical reinforcement and thermal protection. 77 Plyglas can be used to hold arc- and fire-proof tape in place on cables or whenever high temperature protection and mechanical strength is needed. Communication Industry Specification 7611, MIL-I-15126F/GFT.
Product specifications
53 PLYARC® Arc- and Fire-Proofing Tape
A 30 mil (0,76mm) elastomeric tape that provides excellent flame and arc protection for all types of cables. When exposed to flame, 53 Plyarc will generate a thermally insulating residue for cable protection. Use on cable conduit where added fire protection is required. Excellent flexibility and conformability for easy application.
Product specifications
