Customer Service 
Contact with us

I am in:

Products / Electrical

Today, Plymouth has the following product portfolio for the Electrical Sector:

VINYL ELECTRICAL TAPES

General Purpose Products
Plymouth N10
Plymouth N12
Plymouth N15
Plymouth N17 / Plymouth N20 / Plymouth N40
Premium 111
PREMIUM 85 CW
PREMIUM 37 Color Coding
HD 2
PLYWRAP® 11 (10 mil) Vinyl Pipewrap

Plymouth N10

This economical tape is available in several colors. It is highly conformable with a good adhesion level. N10 is flame retardant and used for general insulation purposes and color coding.

Product specifications

Plymouth N12

This insulating tape is available in several colors. It is highly conformable with a good adhesion level. N12 is flame retardant and suitable for all kind of mechanical and electrical applications. N12 can be used for primary insulations of splices up to 600 V.

Product specifications

Plymouth N15

Premium. This black tape has a high quality product with superior mechanical resistance. N15 Premium is suitable for reparation of outer jackets of power cables and other applications where higher abrasion resistance is required.

Product specifications

Plymouth N17 / N20 / N40

These black PVC tapes are equipped with a special high level of adhesive and are designed for all types of mechanical and electrical applications. Additional thickness allows for quicker build-ups and added abrasion protection.

Product specifications N17 / N20 / N40

Premium 111

A 7 mil (0,18mm) all weather, professional grade, pressure sensitive vinyl tape which gives excellent performance over a wide range of temperatures. Cold and weather resistant. Flame retardant. Premium 111 can be used as primary insulation for splices at not more than 600 Volts. Use as protective outer jacket over splices and all low temperature applications. UL 510, ASTM-D-3005, HH-I-595C. Lead-free.

Product specifications

PREMIUM 85 CW

An 8.5 mil (0,21mm) all weather, professional grade, pressure sensitive vinyl tape that provides heavier thickness for added mechanical and electrical protection. Cold and weather resistant. Flame retardant. Premium 85 CW can be used as primary insulation for splices at not more than 600 Volts. Excellent protective jacket over all types of splices. Excellent cold weather performance. UL 510, ASTM-D-3005, MIL-I-24391C.

Product specifications

PREMIUM 37 Color Coding

A 7 mil (0,18mm) all weather, professional grade, pressure sensitive vinyl tape that is available in nine colors for color coding and insulating. Cold and weather resistant. Flame Retardant. Use Premium 37 for quick identification of electrical circuits, containers, and conduit systems, as well as primary insulation for splices at not more than 600 volts. UL 510, ASTM-D-3005, HH-I-595C. Lead-free.

Product specifications

HD 2

A 10 mil (0,25mm) heavy duty, general purpose, pressure sensitive vinyl tape for all types of mechanical and electrical applications. Additional thickness allows for quicker build-ups and added abrasion protection. HD 2 is flame retardant and can be used as primary insulation for splices at not more than 600 volts. UL 510, ASTM-D-2301, MIL-I-7798A.

Product specifications

PLYWRAP® 11 (10 mil) Vinyl Pipewrap

A corrosion protection, pressure sensitive vinyl tape giving complete environmental, mechanical and electrical protection for all types of pipewrapping applications. UV, bacteria and fungus resistant, Plywrap 11 tape can be used for both overhead and direct burial applications. Fed. Spec. L-T- 001512

Product specifications

 

FRICTION & DUCT TAPES

100 ASTM Friction Tape
170 BROWN Friction Tape
PLYDUCT® 48- Commercial Grade Cloth Duct Tape

100 ASTM Friction Tape

A high quality cotton fabric coated on both sides with a black rubber adhesive compound which provides good adhesion to all types of surfaces. A 15 mil (0,38mm) general purpose tape that provides excellent protection against abrasion. ASTM-D-4514, Comm. Spec. 6747, HHT 101A.

Product specifications

170 BROWN Friction Tape

A high quality cotton fabric coated on both sides with a brown rubber adhesive compound which provides good adhesion to all types of surfaces. Distinctive natural rubber color, excellent tack. Provides excellent protection against abrasion for cable and splices.

Product specifications

PLYDUCT® 48- Commercial Grade Cloth Duct Tape

An all purpose duct tape that provides excellent adhesion to all types of surfaces. Laminated cloth construction provides superior mechanical strength and will conform to irregular surfaces. Use for sealing joints on all types of duct work. Excellent for heavy duty applications.

Product specifications


LOW VOLTAGE RUBBER TAPES

122 Rubber Tape-Splicing Compound
150 ASTM Rubber Tape
125 Electrical Filler Tape

122 Rubber Tape-Splicing Compound

122 Rubber Tape is a 30 mil (0,76 mm) self-amalgamating, low voltage rubber tape which is UL approved for use as primary insulation at not more than 600 volts. It easily conforms to irregular shapes and surfaces yielding a void free electrically stable build-up. 122 Rubber tape is compatible with all extruded dielectric cable insulations.

Product specifications

150 ASTM Rubber Tape

A 30 mil (0,76 mm) self-amalgamating, low voltage rubber tape that can be used for insulating cable splices through 2kV, in conjunction with a jacketing tape. Compatible with low and high density polyethylene and polypropylene PIC cables plus all rubber and PVC cable elements. 150 ASTM conforms easily and self amalgamates into a homogenous, void-free mass to provide an effective moisture seal. ASTM-D-4388, Communications Industry Specification 6746.

Product specifications

125 Electrical Filler Tape

A 125 mil (3,2mm) self-amalgamating, low voltage insulating compound designed for quick, void-free insulation build-up. 125 can be easily molded by hand to conform to irregular shapes and can be used as primary insulation for splices through 5kV in conjunction with other insulating tapes. 125 is ideal for covering split bolts, padding bus bar edges and connections, and provides an excellent moisture seal. MIL-I-17695A.

Product specifications


INSULATING MASTICS

10 PLYSEAL® Insulating Mastic
4000 PLYSEAL®-V Vinyl Reinforced Insulating Mastic
5000 BUS-SEAL EPR-Backed Insulating Mastic
Rubber Mastic (RM) Tapes
Vinyl Mastic (VM) Tapes

10 PLYSEAL® Insulating Mastic

A self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 Volts. 10 Plyseal has superior adhesion to metals, cable insulations, and jackets with no adverse effect on polymeric conducting shields. For watersealing duct work, cable ends, and all types of splices.

Product specifications

4000 PLYSEAL®-V Vinyl Reinforced Insulating Mastic

Used for encapsulating and sealing sub-surface and overhead cases and auxiliary sleeves, ducts, and cable ends. Excellent for sheath and conduit repairs. Impervious to ozone, fresh water, salt water, and soil chemicals. Vinyl film backing provides mechanical strength and abrasion resistance. Plyseal-V is preferred for cold weather applications.

Product specifications

5000 BUS-SEAL EPR-Backed Insulating Mastic

A laminate of W963 Plysafe EPR high voltage tape and 10 Plyseal insulating mastic in a roll form. A one-pass application of this laminate provides high dielectric strength, instant adhesion and excellent conformability. For insulating and water-proofing high voltage bus connectors and conductors. Corrosion protection for junction boxes, bus-duct and cable tray joints. Outer jacket for direct buried high voltage splices. For primary insulation up to 2kV. For bus-bar applications, one half-lapped layer of 5000 Bus-Seal will provide short circuit protection up to 15kV and brush protection up to 25kV.

Product specifications

Rubber Mastic (RM) Tapes

A self-bonding mastic tape consisting of an ethylene propylene rubber (EPR) backing, bonded to a tacky, temperature stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cable. Can be wrapped, stretched or molded around irregular shapes for insulation build-up, water-sealing, and surface protection. Provides excellent electrical properties, superior adhesion, moisture and chemical resistance. For primary insulation up to 2kV.

Product specifications

Vinyl Mastic (VM) Tapes

A self-fusing mastic compound with an all-weather, premium vinyl backing that can be used for insulating and water-sealing electrical connections through 600 volts. Small roll sizes can be stretched and molded around irregular shapes, even in tight locations. Provides excellent electrical properties, superior adhesion, and moisture and chemical resistance. Vinyl backing adds UV protection. Use for insulating overhead and direct buried low voltage connections, motor lead connections, and cable and conduit repair.

Product specifications


LOW VOLTAGE SPLICE KITS

SPLICE WRAP TM One-Step Splice Kit

SPLICE WRAP TM One-Step Splice Kit

For insulating and water-proofing direct burial or overhead splices and terminations through 2000V. For cable jacket repair and restoration, and ground seal for shielded power cable. Suitable for straight and branch joints. Easy 1-step application. Connectors not included.

Product specifications

HIGH VOLTAGE TAPES

L969 PLYVOLT TM Linerless High Voltage Insulating Tape
W963 PLYSAFE® High Voltage Insulating Tape with Liner
3 BI-SEAL® High Voltage Insulating Tape with Liner
W962 High Voltage Insulating Tape With Liner
PIB Medium Voltage Tape with Black Liner
17 PLYSHIELD® EPR Shielding Tape
15 PLYBRAID Tinned Copper Shielding Tape
PLYSTRAP® Tinned Copper Ground Braid

L969 PLYVOLT TM Linerless High Voltage Insulating Tape

A 30 mil (0,76mm) EPR, self-bonding high voltage tape for insulating and jacketing splices through 69kV. L969 Plyvolt is linerless, and permits quicker application than a tape with liner. Yields a void-free build-up. Excellent corona, ozone, and chemical resistance. L969 Plyvolt can also be used for building stress-cones on power cable through 35kV. ASTM-D-4388, HH-I-553C.

Product specifications

W963 PLYSAFE® High Voltage Insulating Tape with Liner

A 30 mil (0,76mm) EPR, self-amalgamating high voltage tape for insulating and jacketing splices through 69kV. W963 Plysafe amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for waterproofing. ASTM-D-4388, HH-I-553C/Grade A, MIL-I-3825B.

Product specifications

3 BI-SEAL® High Voltage Insulating Tape with Liner

A polyethylene and ethylene propylene rubber based tape possessing superior electrical, chemical, mechanical and thermal properties. Fuses quickly, yielding a void-free, electrically stable build-up. For insulating and jacketing of splices on power cable from 600 volts through 69kV and for building stress cones and jacketing of terminations on power cable from 600 volts through 35kV. Available in 20 mil (0,51mm) or 30 mil (0,76mm) thickness. ASTM-D-4388, HH-I-553C.

Product specifications

W962 High Voltage Insulating Tape With Liner

20 mil (0,51mm) EPR based high voltage tape with superior electrical, chemical, mechanical, and thermal properties. For insulating and jacketing of splices on power cable from 600 volts through 138kV and for building stress cones and jacketing of terminations on power cable from 600 volts through 35kV. W962 is self-amalgamating. ASTM-D-4388.

Product specifications

PIB Medium Voltage Tape with Black Liner

A self-amalgamating, polyisobutylene-based medium voltage tape that maintains a tight insulation build-up for void-free electrical stability and permanent resistance to moisture penetration. For insulating and jacketing of splices on power cables from 600 volts through 46kV. Plymouth's PIB has excellent stretch capabilities that allow fast taping speeds and is compatible with all extruded dielectrical cable insulations.

Product specifications

17 PLYSHIELD® EPR Shielding Tape

A 30 mil (0,76mm) EPR self-amalgamating, conducting tape for shielding high voltage splices and terminations. Use for rebuilding strand shield and insulation shields on high voltage splices and for shielding all types of connections. ASTM-D-4388.

Product specifications

15 PLYBRAID Tinned Copper Shielding Tape

A tinned copper mesh-knit shielding with exceptional conformability for replacing metallic shield in shielded cable repair. The two-inch width allows for quicker application and a larger overlap for increased safety in flexible cables.

Product specifications

PLYSTRAP® Tinned Copper Ground Braid

A woven tinned copper braid used for grounding high voltage splices and terminations. Also used for shield continuation on splices. Plystrap has current carrying capacity of #9 AWG solid copper.

Product specifications


Special PURPOSE PRODUCTS

20 PLYSIL® Silicone Rubber Tape
53 PLYARC® Arc- and Fire-Proofing Tape
77 PLYGLAS® Pressure Sensitive Glass Cloth Tape
61 and 61A Varnished Dacron-Glass Tape
44 NEOPRENE Jacketing Tape
PLYPREP TM Cable Preparation Kit
Terminal Wrap

20 PLYSIL® Silicone Rubber Tape

A 20 mil (0,51mm) triangular cross-section, self-amalgamating, silicone rubber tape used for jacketing high voltage terminations on solid dielectric cable through 69kV. 20 Plysil is track and erosion resistant and can be used as primary insulation for high temperature (180°C) applications. ASTM-D-2148, MIL-I-46852A.

Product specifications

53 PLYARC® Arc- and Fire-Proofing Tape

A 30 mil (0,76mm) elastomeric tape that provides excellent flame and arc protection for all types of cables. When exposed to flame, 53 Plyarc will generate a thermally insulating residue for cable protection. Use on cable conduit where added fire protection is required. Excellent flexibility and conformability for easy application. Available in grey or in fibre optic orange.

Product specifications

77 PLYGLAS® Pressure Sensitive Glass Cloth Tape

A 7 mil (0,18mm) woven glass fabric tape with a thermosetting rubber based, pressure sensitive adhesive used for insulating and protecting high temperature (130°C) connections, such as motor leads and transformer windings. 77 Plyglas has high tensile strength for splice reinforcement and provides excellent tear and abrasion resistance. Use 77 Plyglas to hold down 53 Plyarc arc -and fire- proofing tape. Comm. Spec. 7611, ASTM-D-2754, MIL-I-15126F/GFT.

Product specifications

61 and 61A Varnished Dacron-Glass Tape

61 and 61A Varnished Dacron-Glass Tapes are a fine weave of Dacron and fiber glass threads, impregnated with a fully cured polyester coating which provides excellent electrical and mechanical protection. The tapes are intended for use to 155°C and have good flexibility to allow tight taping of irregular shapes. Available without adhesive (61-7mils [18mm]) and with adhesive (61a - 8mils [20mm]).

Product specifications

44 NEOPRENE Jacketing Tape

A 30 mil (0,76mm) self-amalgamating neoprene tape specially formulated for permanent protection of cables exposed to oil, grease, and other hydrocarbons. 44 Neoprene is chemical, weather, and flame resistant. Use for corrosion protection on lead splicing sleeves.

Product specifications

PLYPREP TM Cable Preparation Kit

Plyprep is an effective and environmentally friendly cleaning kit for the proper preparation of both high and low voltage cables prior to splicing or terminating. Very effective for removing grease, oil, tar, and other contaminants from cables. Kits have everything necessary to prepare cables for a splice or termination. Each kit contains three sealed wipe sets and one 120 grit non-conducting abrasive cloth.

Product specifications

Terminal Wrap

Use for terminating three-core shielded cables for motor leads. Each kit contains three rolls of a specially formulated Stress-Wrap 1" (25mm) wide, coreless rolls. Stress-Wrap is a laminate of EPR High Voltage Insulating Tape and a special voltage gradient stress relieving compound. US Patent #4,187,389.


Termination Kits

COLDTERM TM Cold Shrink Cable Termination
Kits - Outdoor/Indoor

COLDTERM TM Cold Shrink Cable Termination Kits - Outdoor/Indoor

An anti-tracking, skirted (outdoor only) silicone rubber termination for tape shielded, wire shielded, JCN and Unishield® cables. Universal kit design fits all extruded dielectric cables. Outdoor models feature unique pull-over tabs for fast and easy installation and superior insulating qualities. Design range covers 5-8kV (3/0 AWG to over 1000kCMIL), 15kV (2 AWG to 5000kCMIL), 25-28kV (2/0 AWG to 1250kCMIL) and 35 kV (1/0 AWG to 1000 KCMIL). Meets IEEE Standard No. 48, Class 1. Note: kits do not include terminal lugs.

Product specifications



ELECTRICAL

TELECOMMUNICATION

AUTOMOTIVE

INDUSTRIAL

MINING