Plyfill is a self-amalgamating low voltage insulating mastic, designed for quick void-free insulation build-up.
Plyfill can be easily molded by hand to confirm to irregular shapes and can be used as primary insulation for splices through 5 kV in conjunction with other insulating tapes. Plyfill provides an excellent moisture seal.
A 20 mil (0,51mm) ethylene propylene rubber, self-amalgamating high voltage tape for insulating and jacketing splices though 69kV. W951 Plysafe amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for water-proofing.
A 30 mil (0,76mm) EPR, self-amalgamating high voltage tape for insulating and jacketing splices through 69kV. W963 Plysafe amalgamates quickly, yielding a void-free, electrically stable build-up and is ideal for water-proofing. ASTM-D-4388, HH-I-553C/Grade A, MIL-I-3825B.
A 20 mil (0,51mm) triangular cross-section, self-amalgamating, silicone rubber tape used for jacketing high voltage terminations on solid dielectric cable through 69kV. 20 Plysil is track and erosion resistant and can be used as primary insulation for high temperature (180°C) applications. ASTM-D-2148, MIL-I-46852A.
A corrosion protection, pressure sensitive vinyl tape giving complete environmental, mechanical and electrical protection for all types of pipewrapping applications. UV, bacteria and fungus resistant, Plywrap 11 tape can be used for both overhead and direct burial applications. Fed. Spec. L-T- 001512. Lead-free.
61 and 61A Varnished DacronGlass Tapes are a fine weave of Dacron and fiber glass threads, impregnated with a fully cured polyester coating which provides excellent electrical and mechanical protection. The tapes are intended for use to 155°C and have good flexibility to allow tight taping of irregular shapes. Available without adhesive (61-7mils[18mm]) and with adhesive (61A - 8mils [20mm]).
A high quality cotton fabric coated on both sides with a brown rubber adhesive compound which provides good adhesion to all types of surfaces. Distinctive natural rubber color, excellent tack. Provides excellent protection against abrasion for cable and splices.
PlyCap is our latest development in our cold shrink product line. Easy and fast to install with no need for additional tooling. Provide a water tight and chemical and oil resistance to a range of cables.
Recommended uses: Water tight and oil resistant sealing of abandoned cables ends. Excellent moisture and water seal, abrasion resistance, Ozone Resistant, Chemical and oil resistant. No heat required to apply; Cable end seal for all cables.
A polyethylene and ethylene propylene rubber based tape possessing superior electrical, chemical, mechanical and thermal properties. Fuses quickly, yielding a void-free, electrically stable build-up. For insulating and jacketing of splices on power cable from 600 volts through 69kV and for building stress cones and jacketing of terminations on power cable from 600 volts through 35kV. Available in 20 mil (0,51mm) or 30 mil (0,76mm) thickness. ASTM-D-4388, HH-I-553C.
20 mil (0,51mm) EPR based high voltage tape with superior electrical, chemical, mechanical, and thermal properties. For insulating and jacketing of splices on power cable from 600 volts through 138kV and for building stress cones and jacketing of terminations on power cable from 600 volts through 35kV.
W962 is self-amalgamating. ASTM-D-4388.
A self-amalgamating, polyisobutylene- based medium voltage tape that maintains a tight insulation build-up for void-free electrical stability and permanent resistance to moisture penetration. For insulating and jacketing of splices on power cables from 600 volts through 46kV.
Plymouth’s PIB has excellent stretch capabilities that allow fast taping speeds and is compatible with all extruded dielectrical cable insulations.
A self-amalgamating, mechanical grade mastic used for sealing and water-proofing. Excellent adhesion to metals, cable insulations, and jackets. Soft, malleable nature makes Waterseal ideal for molding and conforming to irregular shapes. Use in conjunction with Plymouth’s premium tapes for optimum performance.
A tinned copper mesh-knit shielding with exceptional conformability for replacing metallic shield in shielded cable repair. The two-inch width allows for quicker application and a larger overlap for increased safety in flexible cables.
Plyprep is an effective and environmentally friendly cleaning kit for the proper preparation of both high and low voltage cables prior to splicing or terminating. Very effective for removing grease, oil, tar, and other contaminants from cables.
Kits have everything necessary to prepare cables for a splice or termination. Each kit contains three sealed wipe sets and one 120 grit non-conducting abrasive cloth.
A 30 mil (0,76mm) EPR selfamalgamating, conducting tape for shielding high voltage splices and terminations. Use for rebuilding strand shield and insulation shields on high voltage splices and for shielding all types of connections. ASTM-D-4388.
A woven tinned copper braid used for grounding high voltage splices and terminations. Also used for shield continuation on splices. Plystrap has current carrying capacity of #9 AWG solid copper.
A 30 mil (0,76 mm) self-amalgamating, low voltage rubber tape that can be used for insulating cable splices through 2kV, in conjunction with a jacketing tape. Compatible with low and high density polyethylene and polypropylene PIC cables plus all rubber and PVC cable elements.
150 ASTM conforms easily and self-amalgamates into a homogenous, void-free mass to provide an effective moisture seal. ASTM-D-4388, Communications Industry Specification 6746.
A 30 mil (0,76mm) EPR , self-bonding high voltage tape for insulating and jacketing splices through 69kV. L969 Plyvolt is linerless, and permits quicker application than a tape with liner. Yields a void-free build-up. Excellent corona, ozone, and chemical resistance.
L969 Plyvolt can also be used for building stress-cones on power cable through 35kV. ASTM-D-4388, HH-I-553C.
A self-bonding mastic tape consisting of an ethylene propylene rubber (EPR) backing, bonded to a tacky, temperature stable, electrical grade mastic. Use for insulating and moisture sealing splices and terminations on solid dielectric cable. Can be wrapped, stretched or molded around irregular shapes for insulation build-up, water-sealing, and surface protection.
Provides excellent electrical properties, superior adhesion, moisture and chemical resistance. For primary insulation up to 2kV.
A 7 mil (0,18mm) woven glass fabric tape with a thermosetting rubber based, pressure sensitive adhesive used for insulating and protecting high temperature (130°C) connections, such as motor leads and transformer windings.
77 Plyglas has high tensile strength for splice reinforcement and provides excellent tear and abrasion resistance. Use 77 Plyglas to hold down 53 Plyarc arc- and fire-proofing tape. Comm. Spec. 7611, ASTM-D-2754, MIL-I- 15126F/GFT.
A 30 mil (0,76mm) UL listed, self-amalgamating, low voltage rubber tape which can be used as primary insulation for splices at not more than 600 volts when used in conjunction with a friction or vinyl jacketing tape. UL 510.
A self-fusing mastic compound with an all-weather, premium vinyl backing that can be used for insulating and water-sealing electrical connections through 600 volts. Small roll sizes can be stretched and molded around irregular shapes, even in tight locations.
Provides excellent electrical proper-ties, superior adhesion, and moisture and chemical resistance. Vinyl backing adds UV protection. Use for insulating overhead and direct buried low voltage connections, motor lead connections, and cable and conduit repair.
An 8.5 mil (0,21mm) all weather, professional grade, pressure sensitive vinyl tape that provides heavier thickness for added mechanical and electrical protection. Cold and weather resistant. Flame retardant. Can be used as primary insulation for splices at not more than 600 Volts.
Excellent protective jacket over all types of splices. UL 510, ASTM-D-3005, MIL-I-24391C. Lead-free.
A 7 mil (0,18mm) all weather, professional grade, pressure sensitive vinyl tape that is available in nine colors for color coding and insulating. Cold and weather resistant. Flame Retardant. Use Premium 37 for quick identification of electrical circuits, containers, and conduit systems, as well as primary insulation for splices at not more than 600 volts.
A 7 mil (0,18mm) all weather, professional grade, pressure sensitive vinyl tape which gives excellent performance over a wide range of temperatures. Cold and weather resistant. Can be used as primary insulation for splices at not more than 600 Volts. Use as protective outer jacket over splices and all low temperature applications. UL 510, ASTM-D-3005, HH-I- 595C. Lead-free.
A self-amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections up to 600 Volts. 10 Plyseal has superior adhesion to metals, cable insulations, and jackets with no adverse effect on polymeric conducting shields. For watersealing duct work, cable ends, and all types of splices.
A 10 mil (0,25mm) heavy duty, general purpose, pressure sensitive vinyl tape for all types of mechanical and electrical applications. Allows for quicker build-ups and added abrasion protection.
Is flame retardant and can be used as primary insulation for splices at not more than 600 volts., ASTM-D-2301, MIL-I-7798A. Lead-free.
A high quality cotton fabric coated on both sides with a black rubber adhesive compound which provides good adhesion to all types of surfaces. A 15 mil (0,38mm) general purpose tape that provides excellent protection against abrasion. ASTM-D-4514, Comm. Spec. 6747, HHT 101A
A laminate of W963 Plysafe EPR high voltage tape and 10 Plyseal insulating mastic in a roll form. A one-pass application of this laminate provides high dielectric strength, instant adhesion and excellent conformability.
For insulating and water-proofing high voltage bus connectors and conductors. Corrosion protection for junction boxes, bus-duct and cable tray joints.
A 30 mil (0,76mm) selfamalgamating neoprene tape specially formulated for permanent protection of cables exposed to oil, grease, and other hydrocarbons. 44 Neoprene is chemical, weather, and flame resistant. Use for corrosion protection on lead splicing sleeves..
A premium duct tape that provides excellent adhesion to all types of surfaces. Laminated cloth construction provides superior mechanical strength and will conform to irregular surfaces. Use for sealing joints on all types of duct work. Excellent for heavy duty applications.
3148 (NEW): 2” x 25 yards (75 feet) each roll – packaged 24 rolls per case
Item 3150: 2” x 60 yards (180 feet) each roll – packaged 24 rolls per case
A 7 mil (0,18) general purpose, flexible, weather resistant, pressure sensitive vinyl tape for all kinds of mechanical and electrical applications. Revere 7 is flame retardant and can be used as primary insulation for splices up
to 600 volts. UL 510, CSA 22.2 MIL-I-7798A. Lead-free.
A 125 mil (3,2mm) selfamalgamating, low voltage insulating compound designed for quick, void-free insulation build-up. 125 can be easily molded by hand to conform to irregular shapes and can be used as primary insulation for splices through 5kV in conjunction with other insulating tapes.
125 is ideal for covering split bolts, padding bus bar edges and connections, and provides an excellent moisture seal. MIL-I-17695A.
A 30 mil (0,76mm) elastomeric tape that provides excellent flame and arc protection for all types of cables. When exposed to flame, 53 Plyarc will generate a thermally insulating residue for cable protection. Use on cable conduit where added fire protection is required. Excellent flexibility and conformability for easy application. Available in grey.
An anti-tracking, skirted (outdoor only) silicone rubber termination for tape shielded, wire shielded, JCN and Unishield® cables. Universal kit design fits all extruded dielectric cables. Outdoor models feature unique pull-over tabs for fast and easy installation and superior insulating qualities.
Design range covers 5-8kV (3/0 AWG to over 1000kCMIL), 15kV (2 AWG to 5000kCMIL), 25-28kV (2/0 AWG to 1250kCMIL) and 35kV (1/0 AWG to 1000KCMIL). Meets IEEE Standard No. 48, Class 1. Note: kits do not include terminal lugs.